Meiko Ltd UPSTER U500 GIO (REMOTE)

UPster U500 GiO front loading dish washing machine with integral reverse osmosis water treatment unit for spot free washing. Machine constructed throughout in type 304 (1.4301) high grade stainless steel and with full external stainless steel cladding. Additional features include pressed tank with large radius coved corners, double wall construction for excellent sound and heat insulation, and sloped internal upper wash tank surfaces to prevent dripping onto clean items.

Up to 720 dinner plates per hour
(Dependent upon electrical and water temperature connections)
Dimensions: 600 mm (w) x 680 mm (d) x 820/850 mm high
Clear entry passing height of 420 mm
Basket size 500 mm x 500 mm
Electrics: 230/50/1phase / 400/50/3ph
GiO module rear mounted

Capacity : 40 racks per hour
10ºC cold fill 1 phase : 4.83 kW
10ºC cold fill 3 phase : 6.83 kW

Product listed in WRAS water fittings and materials directory. Certificate No. 1604078. Suitable for backflow protection against fluid category 5. *Suitable for water connection up to 18 degrees clark, addtional water treatment will be required above this hardness.

Provided with the following features: –
90/120/240 second programme cycle
Water connection 1 x 22 mm ¾”BSP
Suitable for a softened cold water supply
Water supply pressure 1-5 bar
Minimum flow rate 5lt/min
Tank fill capacity 11lt
Final rinse consumption 2.6lt/basket
Waste connection 2 x 40mm Ø standing waste
Wash pump motor rating of 0.55 kW
Detergent and rinse aid dosing pump with containers
Hose and cable connection kit
Drain pump for high level waste outlet
Soft start feature on wash pump
Rotating upper and lower rinse and wash arms
Touchpad controls (no switches)
MIKE 2 infrared interface for exchange of data services
Integral class ‘AA’ air gap with rinse booster pump.
Self-cleaning cycle after drain down
Two (2) finger type plate racks
One (1) open type cup/bowl rack
Two (2) eight compartment cutlery racks

Note:
 GiO module overall dimensions 140mm (w) x 550 mm (d) x 600 mm (h).
 Feed water temperature to be not less than 1ºC and not more than 30ºC.
 Maximum hardness of the untreated water not to exceed 24ºClark (343ppm).
 Conductivity of the untreated feed water to be no more than 1000 NS/cm
 Purity level of the treated water in the region of 98%.
 Water filter, stop-valve, non-return check valve, pressure reducing valve and manometer included as part of the connection kit.
 Supplied filter to be changed, interval dependant on water quality.
(Ref: UPster U500 GiO)