Meiko Ltd UPSTER H500 AC AKTIVCLEAN

UPster H500 AktivClean-AC passthrough dish washer with integral water softener, incorporating Air Concept integrated air management unit with built-in, self-cleaning heat recovery unit. Machine constructed throughout in type 304 (1.4301) high grade stainless steel and with full external stainless steel cladding. Additional features include pressed tank with large radius coved corners, double wall construction for excellent sound and heat insulation, and sloped internal upper wash tank surfaces to prevent dripping onto clean items.

Up to 720 Dinner plates per hour
(Dependent upon electrical and water temperature connections)
Dimensions: 635 (w) x 750 (d) x 1470 mm high
With hood open 2050 mm high
Passing height 440 mm
Working height 850 mm
Basket size: 500 mm x 500 mm
Electrics: 400/50/3phase

Capacity : 40 racks per hour
10ºC cold fill 3 phase : 8.7 kW

Provided with the following features: –
 90/150/240 second programmes
 Water connection 1 x 22 mm ¾” BSP
 Suitable for a softened cold water supply
 Water supply pressure 1-5 bar
 Minimum flow rate 5lt/min
 Tank fill capacity 22lt
 Final rinse consumption 2.6lt/basket
 Waste connection 1 x 40 mm Ø standing waste
 Wash pump motor rating 0.75 kW
 Detergent and rinse aid dosing pump incorporated
 Hose and cable connection kit supplied
 Drain pump and rinse booster pump fitted as standard
 Soft start feature on wash pump motor
 Rotating upper and lower rinse and wash arms
 Aqua-stop system for water leak detection
 Aktiv plus double filtration of wash water
 Perforated covers over wash tank
 Internal basket guides adjustable on site for corner or straight operation
 MIKE 2 Infrared interface for exchange of data services
 Touch sensitive control (no switches)
 Class ‘A’ air gap with rinse booster pump
 Self-cleaning cycle following drain down
 Two (2) finger type plate racks
 One (1) open type cup/bowl rack
 Two (2) eight compartment cutlery racks

Including Point Air Concept integrated air management unit with built-in, self-cleaning heat recovery unit.

 Machine overall height with Air Concept fitted will be 2140 mm.
 Machine requires a cold water fill only.
 Machine equipped with built-in self-cleaning nozzles.
 No additional water need for the self-cleaning process.
 Exhaust air extraction program extension time will be 30 seconds.
 Reduction in radiated heat transmitted from the machine will be 1.3 kW.
 Exhaust air temperature with incoming water at 12°C will be 25°C.
 Reduction of steam volume discharged into the wash-up area will be 80%.
 Reduction in the connected load of the washing machine will be 1.5 kW.
 A minimum of 20-25 air changes per hour required within the dish wash area for efficient operation of the AC unit.